DTC P2185 - Engine Coolant Temperature Sensor 2 Circuit High
WARNING: This page is about a different variant/trim than selected.
P2185 - ENGINE COOLANT TEMPERATURE SENSOR 2 CIRCUIT HIGH
| Description: | This DTC sets when the secondary cooling system engine coolant temperature 2 (ECT2) sensor value is greater than the self-test maximum of 4.6 volts or -50°C (-58°F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An ECT2 PID reading greater than 4.6 volts with the ignition ON, engine OFF or during any engine operating mode indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST K . | ||