DTC P214E - REDUCTANT Pump A Current Too High
WARNING: This page is about a different variant/trim than selected.
P214E - REDUCTANT PUMP A CURRENT TOO HIGH
| Description: | This DTC sets when the reductant pump control module detects excessive current draw on the reductant pump motor drive circuits. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RG . | ||