DTC P2128 - Throttle/Pedal Position Sensor/Switch E Circuit High
WARNING: This page is about a different variant/trim than selected.
P2128 - THROTTLE/PEDAL POSITION SENSOR/SWITCH E CIRCUIT HIGH
| Description: | This DTC sets when the accelerator pedal position (APP) sensor APP2 circuit voltage is greater than 4.75 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AG . | ||