DTC P2127 - Throttle/Pedal Position Sensor/Switch E Circuit Low
WARNING: This page is about a different variant/trim than selected.
P2127 - THROTTLE/PEDAL POSITION SENSOR/SWITCH E CIRCUIT LOW
| Description: | This DTC sets when the accelerator pedal position (APP) sensor APP2 circuit voltage is less than 0.25 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AG . | ||