DTC P1703 - Brake Switch Out Of Self Test Range
WARNING: This page is about a different variant/trim than selected.
P1703 - BRAKE SWITCH OUT OF SELF TEST RANGE
| Description: | The DTC sets when the key ON, engine OFF (KOEO) self-test is carried out, and the brake pedal position (BPP) switch signal is high, or during the key ON, engine running (KOER) self-test, the BPP switch signal does not cycle high and low. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Using the diagnostic tool, check the BOO1 PID. The stoplamps and BOO1 PID should turn ON and OFF with brake pedal activation. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AI . | ||