DTC P117B - Exhaust Gas Temperature Sensor Correlation - Bank 1
WARNING: This page is about a different variant/trim than selected.
P117B - EXHAUST GAS TEMPERATURE SENSOR CORRELATION - BANK 1
| Description: | The powertrain control module (PCM) monitors the 4 exhaust gas temperature (EGT) sensors at key ON, engine OFF, following a 6-hour soak to determine if a concern is present. This PCM compares the values of the 4 EGT sensors to verify the sensors correlate to each other. The test fails when the temperature difference at one of the EGT sensors is greater than 50°C (122°F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the EGT PIDs to determine which one of the 4 sensors does not correlate. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||