DTC P1140 - Water In Fuel Condition
WARNING: This page is about a different variant/trim than selected.
P1140 - WATER IN FUEL CONDITION
| Description: | The water in fuel (WIF) sensor is monitored by the PCM. This DTC sets when the PCM detects water in the fuel, and the WIF indicator lamp is illuminated. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Drain a fuel sample from the fuel conditioning module and inspect for water or contaminants. If no water or contaminants are in the container, check for a circuit concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST O . | ||