DTC P0A10 - Dc/Dc Converter Status Circuit High
WARNING: This page is about a different variant/trim than selected.
P0A10 - DC/DC CONVERTER STATUS CIRCUIT HIGH
| Description: | This DTC sets when an error occurs in the PCM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a replacement PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the | ||