DTC P067C - Cylinder 5 Glow Plug Circuit Low
WARNING: This page is about a different variant/trim than selected.
P067C - CYLINDER 5 GLOW PLUG CIRCUIT LOW
| Description: | The PCM carries out a functional key ON, engine running (KOER) self-test for the glow plug system. During the self-test the PCM enables the glow plug control module (GPCM) which monitors each individual glow plug and harness for concerns. This DTC sets when the GPCM detects a concern with a glow plug or the glow plug harness, and the GPCM sends a message to the PCM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the glow plug wire harness for a short circuit. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AF . | ||