DTC P0504 - Brake Switch A/B Correlation
WARNING: This page is about a different variant/trim than selected.
P0504 - BRAKE SWITCH A/B CORRELATION
| Description: | The PCM does a comparison test between the brake pedal position sensor (BPS) and the brake pedal position (BPP) switch. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the state of the BOO1 and BOO2 PIDs. The BOO1 PID is normally open and BOO2 PID is normally closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AI . | ||