DTC P0342 - Camshaft Position Sensor A Circuit Low (Bank 1 Or Single Sensor)
WARNING: This page is about a different variant/trim than selected.
P0342 - CAMSHAFT POSITION SENSOR A CIRCUIT LOW (BANK 1 OR SINGLE SENSOR)
| Description: | This DTC sets when the PCM detects an open or a short to ground on the CMP11 circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST V . | ||