DTC P0336 - Crankshaft Position Sensor A Circuit Range/Performance
WARNING: This page is about a different variant/trim than selected.
P0336 - CRANKSHAFT POSITION SENSOR A CIRCUIT RANGE/PERFORMANCE
| Description: | This DTC sets when the input signal to the PCM from the crankshaft position (CKP) sensor is erratic. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. Monitor the RPM PID while cranking the engine. A value of 0 RPM indicates a CKP concern. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||