DTC P0315 - Crankshaft Position System Variation Not Learned
WARNING: This page is about a different variant/trim than selected.
P0315 - CRANKSHAFT POSITION SYSTEM VARIATION NOT LEARNED
| Description: | The PCM has not learned the crankshaft pulse wheel tooth spacing. This DTC disables the misfire monitor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Requires visual inspection of the CKP sensor and the crankshaft pulse wheel teeth for damage. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST D . | ||