DTC P0300 - Random Misfire Detected
WARNING: This page is about a different variant/trim than selected.
P0300 - RANDOM MISFIRE DETECTED
| Description: | This DTC sets when there is a full loss of combustion for a calibrated amount of time in greater than 1 cylinder. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Access the PCM and record the freeze frame data. The misfire freeze frame data may be used to determine the operating conditions when the misfire DTC was set. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AR . | ||