DTC P02E1 - Diesel Intake Air Flow Control Performance
WARNING: This page is about a different variant/trim than selected.
P02E1 - DIESEL INTAKE AIR FLOW CONTROL PERFORMANCE
| Description: | This DTC sets when the PCM detects a concern with the intake throttle position versus the desired position, the throttle does not return to the open position when commanded or a broken return spring concern is present. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. Check the intake throttle for a damaged return spring. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AX . | ||