DTC P0232 - Fuel Pump Secondary Circuit High
WARNING: This page is about a different variant/trim than selected.
P0232 - FUEL PUMP SECONDARY CIRCUIT HIGH
| Description: | If the FPM circuit is fixed at a high voltage, the PCM begins to increment a counter. This DTC sets when the PCM is still not detecting a duty cycled signal on the FPM circuit after a calibrated amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST MA . | ||