DTC P0230 - Fuel Pump Primary Circuit
WARNING: This page is about a different variant/trim than selected.
P0230 - FUEL PUMP PRIMARY CIRCUIT
| Description: | This DTC sets if the FPC circuit voltage is less than or greater than a calibrated limit, for a calibrated amount of time. With the fuel pump (FP) commanded ON, the PCM is able to detect an open, a short to ground or a short to voltage on the FPC circuit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST MA . | ||