DTC P0180 - Fuel Temperature Sensor A Circuit
WARNING: This page is about a different variant/trim than selected.
P0180 - FUEL TEMPERATURE SENSOR A CIRCUIT
| Description: | This DTC sets when the difference between the fuel rail temperature (FRT) sensor value and the PCM temperature value exceeds a calibrated value at engine start after a 6 hour soak. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the FRT voltage and temperature PIDs on a scan tool to isolate an open or short circuit from the system concern. Diagnose any FRT circuit related DTCs first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST MC . | ||