DTC P0111 - Intake Air Temperature Sensor 1 Circuit Range/Performance (Bank 1)
WARNING: This page is about a different variant/trim than selected.
P0111 - INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | This DTC sets when the IAT11 PID does not correlate with the AAT, CAC_T, ECT2 or the EGRTC PIDs at ignition ON after an 8 hour soak period has been completed. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Make sure the IAT reading and the other temperature sensor readings are similar when the engine is cold. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST F . | ||