DTC P0069 - Map - Barometric Pressure Correlation
WARNING: This page is about a different variant/trim than selected.
P0069 - MAP - BAROMETRIC PRESSURE CORRELATION
| Description: | This DTC sets when the difference between the manifold absolute pressure (MAP) and barometric pressure (BARO) sensors is greater than the maximum calibrated limit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. If during KOEO the difference between the MAP and BARO sensors is greater than 4.5 kPa (0.65 psi) for greater than 5 seconds, a concern is indicated. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AU . | ||