LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit-350 Base, Van Cargo Extended, 3.5L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Fuel Charging And Controls - Turbocharger - 3.2L DURATORQ-TDCI (148KW/200PS) - Puma) >> Removal And Installation >> Turbocharger Oil Supply Tube >> Removal

Turbocharger Oil Supply Tube: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Refer to: Jacking and Lifting - Overview .
  2. Remove the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe .
  3. Remove the lower turbocharger heat shield bolt.
    GFD309962Courtesy of FORD MOTOR COMPANY
  4. Remove the upper turbocharger heat shield bolts and the turbocharger heat shield.
    GFD309963Courtesy of FORD MOTOR COMPANY
  5. Remove the turbocharger oil feed tube assembly and discard the turbocharger oil feed tube assembly.
GFD309964Courtesy of FORD MOTOR COMPANY