Turbocharger Oil Supply Tube: Installation
WARNING: This page is about a different variant/trim than selected.
- Make sure a new turbocharger oil supply tube assembly with new turbocharger oil supply tube bolts and new turbocharger oil supply tube sealing washers are installed.
-
- Install the new turbocharger oil feed tube assembly with new turbocharger oil feed tube bolts and new turbocharger oil feed tube sealing washers.
Torque: 177 lb.in (20 Nm)
- Torque
: 177 lb.in (20 Nm)
- Install the new turbocharger oil feed tube assembly with new turbocharger oil feed tube bolts and new turbocharger oil feed tube sealing washers.
- Install the turbocharger heat shield and the upper turbocharger heat shield bolts
Torque: 18 lb.ft (25 Nm)
- Install the lower turbocharger heat shield bolt.
Torque: 17 lb.ft (23 Nm)
- Install the air cleaner outlet tube. Refer to: Air Cleaner Outlet Pipe .