LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit-350 Base, Van Cargo Extended, 3.5L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Fuel Charging And Controls - 3.2L DURATORQ-TDCI (148KW/200PS) - Puma) >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Installation

Fuel Pump Driver Module (FPDM): Installation

WARNING: This page is about a different variant/trim than selected.

Gas engine 

  1. Install the FPDM and the FPDM mounting bolts.

    Torque: 93 lb.in (10.5 Nm)

    GFD309801Courtesy of FORD MOTOR COMPANY

    Diesel engine 

  2. Install the FPDM and the FPDM mounting nuts.

    Torque: 93 lb.in (10.5 Nm)

GFD309800Courtesy of FORD MOTOR COMPANY