LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit-350 Base, Van Cargo Extended, 3.5L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Cooling - 3.2L DURATORQ-TDCI (148KW/200PS) - Puma) >> Removal And Installation >> Block Heater >> Installation

Block Heater: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: Ensure sealing washer is in position prior to installation.

    To install, reverse the removal procedure.

  2. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals