Cylinder Block
WARNING: This page is about a different variant/trim than selected.
| Item | Specification |
|---|---|
| Cylinder bore diameter | 3.539 -3.540 in (89.9 -89.92 mm) |
| Cylinder bore maximum out-of-round | 0.0003 in (.0075 mm) |
| Main bearing bore diameter (numbers 1-5) - vertical measurement | 2.736 -2.737 in (69.504 -69.52 mm) |
| Main bearing bore diameter (number 6 only) - vertical measurement | 2.933 -2.934 in (74.504 -74.52 mm) |
| Main bearing bore diameter (numbers 1-5) - horizontal measurement | 2.736 -2.737 in (69.502 -69.525 mm) |
| Main bearing bore diameter (number 6 only) - horizontal measurement | 2.933 -2.934 in (74.502 -74.525 mm) |
| Main bearing radial clearance | 0.001 -0.003 in (.024 -.072 mm) |
| Head gasket surface flatness | 0.10 mm (0.0039 in) maximum overall, measured longitudinally and diagonally |