LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit-350 Base, Van Cargo Extended, 3.5L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Electronic Engine Controls - 3.2L DURATORQ-TDCI (148KW/200PS) - Puma) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Installation

Camshaft Position (CMP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
    • Apply clean engine oil and install the CMP sensor and bolt.

      Torque: 71 lb.in (8 Nm)

    • To install, reverse the removal procedure.

GFD310283Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals