DTC U2110 - Throttle/Pedal Position Sensor/Switch A Communication Circuit High
WARNING: This page is about a different variant/trim than selected.
U2110 - THROTTLE/PEDAL POSITION SENSOR/SWITCH A COMMUNICATION CIRCUIT HIGH
| Description: | This DTC sets when the electronic throttle control (ETC) throttle position (TP) signal is too high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This concern exhibits a symptom of limited power. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DV . | ||