DTC P2ABB - WASTEGATE Position Sensor B Circuit Low
WARNING: This page is about a different variant/trim than selected.
P2ABB - WASTEGATE POSITION SENSOR B CIRCUIT LOW
| Description: | This DTC sets when the turbocharger wastegate position 2 sensor is out of self-test range low. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the harness for intermittent concerns, incorrect connections, routing, alterations and damage due to contact with other components. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HN . | ||