DTC P2AB9 - WASTEGATE Position Sensor A Circuit High
WARNING: This page is about a different variant/trim than selected.
P2AB9 - WASTEGATE POSITION SENSOR A CIRCUIT HIGH
| Description: | This DTC sets when the turbocharger wastegate position 1 sensor is out of self-test range high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the harness for intermittent concerns, incorrect connections, routing, alterations and damage due to contact with other components. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HN . | ||