DTC P2628 - O2 Sensor Positive Current Trim Circuit High (Bank 1 Sensor 1)
WARNING: This page is about a different variant/trim than selected.
P2628 - O2 SENSOR POSITIVE CURRENT TRIM CIRCUIT HIGH (BANK 1 SENSOR 1)
| Description: | This DTC sets when a concern is detected with the circuit used to determine the oxygen content in the exhaust gas. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DZ . | ||