DTC P2019 - Intake Manifold Runner Position Sensor/Switch Circuit (Bank 2)
WARNING: This page is about a different variant/trim than selected.
P2019 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT (BANK 2)
| Description: | This DTC sets when the IMRC2 circuit voltage is greater than, or less than, a calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC2 sensor value should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||