DTC P0704 - Clutch Switch Input Circuit
WARNING: This page is about a different variant/trim than selected.
P0704 - CLUTCH SWITCH INPUT CIRCUIT
| Description: | This DTC sets when the clutch pedal voltage value does not change from high to low when the clutch pedal is applied. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When the clutch pedal is applied and then released, the clutch pedal switch voltage should cycle. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TA . | ||