DTC P0685 - ECM/Pcm Power Relay Control Circuit/Open
WARNING: This page is about a different variant/trim than selected.
P0685 - ECM/PCM POWER RELAY CONTROL CIRCUIT/OPEN
| Description: | This DTC sets when the ignition switch position run (ISP-R) circuit indicates the ignition is in the OFF, ACC, or LOCK position, and the amount of time the PCM remains powered through the PCM power relay exceeds a predetermined amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Ability to communicate with the PCM when the ignition is in the OFF, ACC, or LOCK position indicates a hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST B . | ||