LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit-350 Base, Van Cargo Extended, 3.2L Eng VIN V >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P064F - Unauthorized Software/Calibration Detected

DTC P064F - Unauthorized Software/Calibration Detected

WARNING: This page is about a different variant/trim than selected.
P064F - UNAUTHORIZED SOFTWARE/CALIBRATION DETECTED

Description:  This DTC sets when the PCM has detected an unauthorized calibration.
Possible Causes: 
  • Aftermarket accessories and performance modifications
  • PCM programming error
Diagnostic Aids:  Reprogram or update the calibration. Reprogram the vehicle identification (VID) block (use as built data). Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.