LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit-350 Base, Van Cargo Extended, 3.2L Eng VIN V >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Engine Controls - Pinpoint Test JF: Integrated Ignition Coil On Plug Coils A-J Failure Through Pinpoint Test Z: Intermittent - (Except Diesel & Hybrid)) >> Pinpoint Test QC: On Board Diagnostic (OBD) Systems Readiness >> Introduction

Pinpoint Test QC: On Board Diagnostic (OBD) Systems Readiness: Introduction

WARNING: This page is about a different variant/trim than selected.
NOTE: The vehicle may not have completed an OBD drive cycle. This is indicated by the inspection maintenance (I/M) readiness status not complete. In some areas, the OBD drive cycle must be completed to pass an I/M test. Refer to ON BOARD DIAGNOSTIC (OBD) DRIVE CYCLE .