Pinpoint Test JE: Integrated Ignition Coil Pack: Introduction
WARNING: This page is about a different variant/trim than selected.
NOTE:
There is additional information available on this procedure. Copy and paste the following URL into your internet browser: mms://multimedia.ford.com/seopts/Service_Tips/ignition3.wmv.
This pinpoint test is intended to diagnose the following:
- ignition coil packs (12029)
- ignition coil harness
- VPWR circuit to coil packs
- PCM (12A650)
IGNITION COIL TO CYLINDER CORRELATION
| Related DTC | Cylinder Number | Coil Driver (CD) |
|---|---|---|
| P0351 | 1, 4 | A |
| P0352 | 2, 3 | B |
| Pin | Circuit |
|---|---|
| 1 | CD B (Ignition Coil Driver B) |
| 3 | CD A (Ignition Coil Driver A) |
| 2 | VPWR (Vehicle Power) |
Powertrain Control Module (PCM) Connector
For PCM connector views or reference values, refer to REFERENCE VALUES .
| Connector | Pin | Circuit |
|---|---|---|
| 128 PIN | T24 T16 |
CD B CD A |