LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit-350 Base, Van Cargo Extended, 3.2L Eng VIN V >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Fuel Charging And Controls - Turbocharger - 3.2L DURATORQ-TDCI (148KW/200PS) - Puma >> Removal And Installation >> Turbocharger Oil Supply Tube >> Installation

Turbocharger Oil Supply Tube: Installation

  1. Make sure a new turbocharger oil supply tube assembly with new turbocharger oil supply tube bolts and new turbocharger oil supply tube sealing washers are installed.
    GFD309965Courtesy of FORD MOTOR COMPANY
    1. Install the new turbocharger oil feed tube assembly with new turbocharger oil feed tube bolts and new turbocharger oil feed tube sealing washers.

      Torque: 177 lb.in (20 Nm)

    2. Torque

      : 177 lb.in (20 Nm)

    GFD309966Courtesy of FORD MOTOR COMPANY
  3. Install the turbocharger heat shield and the upper turbocharger heat shield bolts

    Torque: 18 lb.ft (25 Nm)

    GFD309963Courtesy of FORD MOTOR COMPANY
  4. Install the lower turbocharger heat shield bolt.

    Torque: 17 lb.ft (23 Nm)

    GFD309962Courtesy of FORD MOTOR COMPANY
  5. Install the air cleaner outlet tube. Refer to: Air Cleaner Outlet Pipe .
scientia non olet · About LEMON Manuals