Network Message Chart
PAM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Air ambient temperature filtered | PCM | Used to temperature compensate the parking aid sensor data. |
| Ignition key type | IPC | Prevents the parking aid from being disabled if a MyKey® restricted key is in use. |
| Power mode | BCM | Used to communicate the ignition switch state. |
| Transmission gear lever position | PCM | Used on gasoline vehicles to enable the rear parking aid when reverse gear is selected. |
| Transmission gear lever position | TCM | Used on diesel vehicles to enable the rear parking aid when reverse gear is selected. |
| Vehicle speed | ABS module | Disables the parking aid when the vehicle speed exceeds a preset threshold. |