LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit Connect XL, Van Cargo >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission, Transfer Case And Power Transfer Unit (2 Of 2) >> Removal And Installation >> Output Shaft Speed (OSS) Sensor >> Removal

Output Shaft Speed (OSS) Sensor: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the main control valve body. Refer to: Main Control Valve Body .
  2. Remove the bolt and remove the OSS sensor.

    Torque: 89 lb.in (10 Nm)

GFD304747Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals