DTC P2020 - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 2)
P2020 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT RANGE/PERFORMANCE (BANK 2)
| Description: | This DTC sets when the intake manifold runner control bank 2 (IMRC2) sensor signal is greater than, or less than, an expected calibrated value during self-test. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC2 sensor value should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||