DTC P0547 - Exhaust Gas Temperature Sensor Circuit (Bank 2 Sensor 1)
P0547 - EXHAUST GAS TEMPERATURE SENSOR CIRCUIT (BANK 2 SENSOR 1)
| Description: | The PCM monitors the operation of the exhaust gas temperature bank 2, sensor 1 (EGT21) to determine if the EGT21 sensor responds to the increase in temperature of the exhaust gas during vehicle operation. The PCM then compares the measured temperature to a modeled value. This DTC sets when, after 5 minutes of driving, following a 6 hour soak, the EGT21 sensor temperature does not correlate to the modeled temperature of 170°C (338° F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RB . | ||