DTC P0349 - Camshaft Position Sensor A Circuit Intermittent (Bank 2)

P0349 - CAMSHAFT POSITION SENSOR A CIRCUIT INTERMITTENT (BANK 2)

Description:	This DTC sets when the CMP21 circuit signal is intermittent. For additional camshaft position (CMP) sensor location information, refer to ENGINE CONTROL COMPONENTS .
Possible Causes:	Intermittent open circuit Intermittent short circuit Camshaft timing incorrectly set Camshaft position sensor trigger wheel out of alignment Damaged CMP sensor shielding Incorrect harness connections Corrosion Damaged camshaft position bank 2 sensor 1 (CMP21)
Diagnostic Aids:	Harness routing, harness alterations, incorrect shielding, or electrical interference from other systems may have an intermittent impact on the CMP signal.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DR .