Fuel Pump Monitor (FPM) - ERFS
NOTE:
The Mustang 5.2L uses 2 fuel pump control modules to control fuel for the fuel delivery system. The PCM individually monitors both fuel pump control modules through the FPM and FPM2 circuits.
The fuel pump control modules communicate diagnostic information to the PCM through the FPM and FPM2 circuits. This information is sent by the fuel pump control modules as a duty cycle signal. The 3 duty cycle signals that may be sent are listed in the following table.
FUEL PUMP CONTROL MODULE DUTY CYCLE SIGNALS
| Duty Cycle | Comments |
|---|---|
| 20% | This duty cycle indicates the fuel pump control module is receiving an invalid duty cycle from the PCM. |
| 40% | This duty cycle indicates the fuel pump control module is receiving an invalid event notification signal from the RCM. |
| 60% | This duty cycle indicates the fuel pump control module is functioning normally. |
| 80% | This duty cycle indicates the fuel pump control module is detecting a concern with the secondary circuits. |
For additional information, refer to POWERTRAIN CONTROL HARDWARE , Fuel Pump Control Module.