LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit Connect XL, Van Cargo >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 2.5L DURATEC (125KW/170PS) >> Removal And Installation >> Coolant Pump >> Removal

Coolant Pump: Removal

  1. Drain the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
  2. Loosen the coolant pump pulley bolts.
    GFD304403Courtesy of FORD MOTOR COMPANY
  3. Remove the accessory drive belt.
    GFD304404Courtesy of FORD MOTOR COMPANY
  4. Remove the bolts and the coolant pump pulley.
    GFD304405Courtesy of FORD MOTOR COMPANY
  5. NOTE: Cover the A/C compressor belt to prevent coolant contamination of the belt.

    Completely cover the A/C compressor belt with waterproof plastic.

  6. Remove the bolts and the coolant pump.
GFD304406Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals