Network Message Chart - Indicators
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| ABS warning indicator request | ABS module | Input used to control the ABS warning indicator. |
| Airbag indicator request | RCM | Input used to control the airbag warning indicator. |
| Alarm mode | BCM | Input used to control the information indicator based on the PATS and perimeter alarm status. |
| BLIS system status - driver side | SODL | Input used to control the BLIS indicator. |
| BLIS system status - passenger side | SODR | Input used to control the BLIS indicator. |
| Brake fluid level warning indicator | BCM | Input used to control the brake warning indicator for the brake fluid level input. |
| Brake (red) warning indicator request | ABS module | Input used to control the brake warning indicator for the ABS input. |
| Charging system indicator request | BCM | Input used to control the flashing of the charging system warning indicator. |
| Fog lamp indicator request | BCM | Input used to control the fog lamp indicator. |
| High beam indicator request | BCM | Input used to control the high beam indicator. |
| Ignition status | BCM | Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. |
| MIL request | PCM | Input used to control the MIL. |
| Oil pressure warning | PCM | Input used to control the low oil pressure warning indicator. |
| Parking brake warning indicator | BCM | Input used to control the brake warning indicator for the parking brake input. |
| Passenger detect status | OCSM | Input used to control the safety belt warning indicator. |
| Position light indication | BCM | Input used to control the lights on indicator. |
| Power system status | BCM | Input used to control the charging system warning indicator. |
| Safety belt buckle status | RCM | Input used to control the safety belt warning indicator. |
| Stability/traction control indication | ABS module | Input used to control the stability/traction control indicator (sliding car icon). |
| Stability/traction control disabled indicator request | ABS module | Input used to control the stability/traction control disabled indicator (sliding car OFF icon). |
| Tire pressure indication | BCM | Input used to control the TPMS indicator |
| Trailer lamp connection | TRM | Input used to disable the BLIS and turn on the BLIS indicator when a trailer is connected. |
| Transmission mode display actual | PCM | Input used to control the select shift segment of the PRNDL display. |
| Transmission shift mode | PCM | Input used to control the PRNDL display. |
| Turn indicator command | BCM | Input used to control the RH/ LH turn or hazard indicators. |