LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Transit Connect XL, Van Cargo >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test K : U1000:00 >> Pinpoint Test K : U1000:00

Pinpoint Test K : U1000:00

  1. K1 REVIEW THE DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.

    • Review the Diagnostic Trouble Codes (DTCs) from the BCM self-test.

    Are any other Diagnostic Trouble Codes (DTCs) present besides U1000:00? 

    Yes  CORRECT the Diagnostic Trouble Codes (DTCs). REFER to BCM DTC Chart .
    No  GO to  K2
  2. K2 REPEAT THE BCM (BODY CONTROL MODULE) SELF-TEST

    • Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).

    • Wait 10 seconds.

    • Repeat the BCM self-test.

    Is DTC U1000:00 still present? 

    Yes  Refer to BCM Guided Routine Testing .
    No  The system is operating correctly at this time. The circuit short has been repaired.