Front Brake Flexible Hose: Installation

To install, reverse the removal procedure.
1. Install the brake flexible hose bracket bolt.
  Torque: 89 lb.in (10 Nm)
2. Position the brake hose, install the clip and connect the brake tube fitting.
  Torque: 133 lb.in (15 Nm)
3. NOTE: Make sure the brake hose is not twisted and is correctly aligned with the markings.
  
  Tighten the brake flexible hose fitting.
  
  Torque: 159 lb.in (18 Nm)
Courtesy of FORD MOTOR COMPANY
Bleed the brake system. Refer to: Brake System Pressure Bleeding .