Intermediate Shaft Seal and Deflector: Notes

WARNING: This page is about a different variant/trim than selected.

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Special Tool(s)

Courtesy of FORD MOTOR COMPANY	Handle, Driver (32 in) 205-907
Courtesy of FORD MOTOR COMPANY	Installer, PTU Linkshaft Seal 205-883
Courtesy of FORD MOTOR COMPANY	Installer, Front Axle Bushing 205-346
Courtesy of FORD MOTOR COMPANY	Remover, Halfshaft 205-241
Courtesy of FORD MOTOR COMPANY	Remover, Transfer Case Bearing Cup 308-125 (T87P-7120-D)
Courtesy of FORD MOTOR COMPANY	Slide Hammer Master Set 100-D112

General Equipment

16 mm (5/8 in) washer (used with 308-125)

Material

Item	Specification
Motorcraft® MERCON® V Automatic Transmission Fluid XT-5-QMC (US); CXT-5-LM12 (Canada)	MERCON® V
Motorcraft® Metal Brake Parts Cleaner (US) / Motorcraft® Brake Parts Cleaner (Canada) PM-4-A or PM-4-B (US); CPM-4 (Canada)	--
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada)	MERCON® LV; WSS-M2C938-A
Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A	ESE-M1C171-A