LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Transfer Case - Power Transfer Unit (PTU)) >> Removal And Installation >> Cover Seal >> Installation

Cover Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Special Tool(s): Handle, Driver (32 in) 205-907, Installer, Halfshaft Oil Seal 308-431, Installer, Shaft Bearing Cup 308-221 (T94P-7025-BH).
    GFD341843Courtesy of FORD MOTOR COMPANY
  2. New cover seal. Special Tool(s): Handle, Driver (32 in) 205-907, Installer, Halfshaft Oil Seal 308-431, Installer, Shaft Bearing Cup 308-221 (T94P-7025-BH).
    GFD341844Courtesy of FORD MOTOR COMPANY
  3. Install the intermediate shaft seal and deflector. Refer to Intermediate Shaft Seal and Deflector .
  4. Fill the PTU as necessary. Refer to Power Transfer Unit (PTU) Draining and Filling .
scientia non olet · About LEMON Manuals