LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Evaporative Emissions - 1.0L ECOBOOST (92KW/125PS)) >> Diagnosis And Testing >> Evaporative Emissions >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage.

    Visual Inspection Chart 

    Mechanical Electrical
    Vacuum line(s)
    Evaporative emission (EVAP) system canister
    EVAP system hose(s)
    EVAP system canister purge valve
    Fuse(s)
    Wiring harness
    Electrical connector(s)
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and refer to the diagnostic tab within the Ford diagnostic equipment.